How to Replace Brakes on a 1998 GMC Sierra

In 1962, General Motors changed the name of Chevrolet and GMC pickups to C and K series. The C series indicated two wheel drive and the K series indicated four wheel drive. In 1975, the names of the trim levels on GMC trucks changed to Sierra, Sierra Grande, High Sierra and Sierra Classic with the Sierra trim level being the base level GMC C K pickup. In 1999, the Sierra name became the model name of the GMC pickup, as GM phased out the C K nomenclature altogether. The 1998 C 1500 Sierra came standard with a 4.3 liter V 6 engine that produced 200 horsepower; it also came standard with front disc brakes. Replacing the brakes on the 1998 GMC Sierra is a relatively easy task.

Pull converse kengät sokos the bearing from the front center of the rotor with your finger. Flip the rotor over and remove the bearing seal from the rear center of the rotor, by prying it with a flat head screwdriver. Pull the inner bearing from under the bearing seal with your finger. Inspect the bearings for looseness or wear converse sverige by placing your fingers through the center, like the spindle would and shaking the outer part of the bearing. A loose or worn bearing has a small amount of free play back and forth and makes a slight clicking noise when shaken. Replace loose bearings with new converse kengät sokos ones.